Search for lepton flavour violation in the eμ continuum with the ATLAS detector in √s = 7 TeV pp collisions at the LHC

This paper presents a search for the t-channel exchange of an R-parity violating scalar top quark (t) in the e^± μ^∓ continuum using 2.1 fb^(−1) of data collected by the ATLAS detector in √s = 7 TeV pp collisions at the Large Hadron Collider. Data are found to be consistent with the expectation from the Standard Model backgrounds. Limits on R-parity-violating couplings at 95 % C.L. are calculated as a function of the scalar top mass (mt). The upper limits on the production cross section for pp → eμX, through the t-channel exchange of a scalar top quark, ranges from 170 fb for m_t=95 GeV to 30 fb for m_t=1000 GeV

A search for tt resonances with the ATLAS detector in 2.05 fb^(−1) of proton-proton collisions at √s =7 TeV

A search for top quark pair resonances in final states containing at least one electron or muon has been performed with the ATLAS experiment at the CERN Large Hadron Collider. The search uses a data sample corresponding to an integrated luminosity of 2.05 fb^(−1), which was recorded in 2011 at a proton-proton centre-of-mass energy of 7 TeV. No evidence for a resonance is found and limits are set on the production cross-section times branching ratio to tt for narrow and wide resonances. For narrow Z′ bosons, the observed 95 % Bayesian credibility level limits range from 9.3 pb to 0.95 pb for masses in the range of m_(Z′)=500 GeV to m_(Z′)=1300 GeV. The corresponding excluded mass region for a leptophobic topcolour Z′ boson (Kaluza-Klein gluon excitation in the Randall-Sundrum model) is m_(Z′)<880 GeV (m_(gKK)< 1130 GeV)

Measurement of dijet production with a veto on additional central jet activity in pp collisions at √s = 7TeV using the ATLAS detector

A measurement of jet activity in the rapidity interval bounded by a dijet system is presented. Events are vetoed if a jet with transverse momentum greater than 20 GeV is found between the two boundary jets. The fraction of dijet events that survive the jet veto is presented for boundary jets that are separated by up to six units of rapidity and with mean transverse momentum 50 < p_T < 500 GeV. The mean multiplicity of jets above the veto scale in the rapidity interval bounded by the dijet system is also presented as an alternative method for quantifying perturbative QCD emission. The data are compared to a next-to-leading order plus parton shower prediction from the powheg-box, an all-order resummation using the hej calculation and the pythia, herwig++ and alpgen event generators. The measurement was performed using pp collisions at √s=7 TeV using data recorded by the ATLAS detector in 2010

Measurement of the inclusive jet cross-section in pp collisions at √s = 2.76 TeV and comparison to the inclusive jet cross-section at √s = 7 TeV using the ATLAS detector

The inclusive jet cross-section has been measured in proton–proton collisions at √s = 2.76 TeV in a dataset corresponding to an integrated luminosity of 0.20^(-1) collected with the ATLAS detector at the Large Hadron Collider in 2011. Jets are identified using the anti-k_t algorithm with two radius parameters of 0.4 and 0.6. The inclusive jet double-differential cross-section is presented as a function of the jet transverse momentum p_T and jet rapidity y, covering a range of 20≤p_T<430 GeV and |y|<4.4. The ratio of the cross-section to the inclusive jet cross-section measurement at √s = 7 TeV , published by the ATLAS Collaboration, is calculated as a function of both transverse momentum and the dimensionless quantity x_T =2 p_T/√s, in bins of jet rapidity. The systematic uncertainties on the ratios are significantly reduced due to the cancellation of correlated uncertainties in the two measurements. Results are compared to the prediction from next-to-leading order perturbative QCD calculations corrected for non-perturbative effects, and next-to-leading order Monte Carlo simulation. Furthermore, the ATLAS jet cross-section measurements at √s = 2.76 TeV and √s = 7 TeV are analysed within a framework of next-to-leading order perturbative QCD calculations to determine parton distribution functions of the proton, taking into account the correlations between the measurements

Measurement of the tt production cross section in the tau + jets channel using the ATLAS detector

A measurement of the top quark pair production cross section in the final state with a hadronically decaying tau lepton and jets is presented. The analysis is based on proton–proton collision data recorded by the ATLAS experiment at the LHC, with a centre-of-mass energy of 7 TeV. The data sample corresponds to an integrated luminosity of 1.67 fb^(−1). The cross section is measured to be σ_(tt)=194±18 (stat.)±46 (syst.) pb and is in agreement with other measurements and with the Standard Model prediction

Search for a light charged Higgs boson in the decay channel H^+→cs in tt events using pp collisions at s√=7 TeV with the ATLAS detector

A search for a charged Higgs boson (H^+) in tt decays is presented, where one of the top quarks decays via t→H^+ b, followed by H^+→ two jets (cs). The other top quark decays to Wb, where the W boson then decays into a lepton (e/μ) and a neutrino. The data were recorded in pp collisions at s√=7 TeV by the ATLAS detector at the LHC in 2011, and correspond to an integrated luminosity of 4.7 fb^(−1). With no observation of a signal, 95 % confidence level (CL) upper limits are set on the decay branching ratio of top quarks to charged Higgs bosons varying between 5 % and 1 % for H^+ masses between 90 GeV and 150 GeV, assuming B(H^+→cs)=100%

Multi-channel search for squarks and gluinos in √s = 7 TeV pp collisions with the ATLAS detector at the LHC

A search for supersymmetric particles in final states with zero, one, and two leptons, with and without jets identified as originating from b-quarks, in 4.7 fb^(−1) of s√=7 TeV pp collisions produced by the Large Hadron Collider and recorded by the ATLAS detector is presented. The search uses a set of variables carrying information on the event kinematics transverse and parallel to the beam line that are sensitive to several topologies expected in supersymmetry. Mutually exclusive final states are defined, allowing a combination of all channels to increase the search sensitivity. No deviation from the Standard Model expectation is observed. Upper limits at 95 % confidence level on visible cross-sections for the production of new particles are extracted. Results are interpreted in the context of the constrained minimal supersymmetric extension to the Standard Model and in supersymmetry-inspired models with diverse, high-multiplicity final states

Extension of SPIS to simulate dust electrostatic charging, transport and contamination of lunar probes

A modification of the Spacecraft Plasma Interaction Software has been undertaken under ESA contract 4000107327/12/NL/AK (SPIS-DUST). The primary goal is to provide mission designers with an engineering tool capable of predicting charged dust behavior in a given plasma environment involving a spacecraft / exploration unit in contact with complex topological features at various locations of the Moon’s surface. The tool also aims at facilitating dust contamination diagnostics for sensitive surfaces such as sensors optics, solar panels, thermal interfaces, etc. In this paper, the new user interface and the new numerical solvers developed in the frame of this project is presented. The pre-processing includes the building of a 3D lunar surface from a topology description (i.e. a point list), an interface to position the spacecraft and a merging interface for the spacecraft elements in contact with the lunar surface. Concerning the physical models, the new solvers have been developed in order to model the physics of the ejection of the dust from the soils, the dusts charging and transport in volume and the dust interaction and contamination of the spacecraft. The post-processing includes the standard outputs of SPIS for the electrostatic computation and the plasma plus dedicated instruments for the diagnosis of the dusts. A set of verification test cases are presented in order to demonstrate the new capabilities of this version of SPIS in realistic conditions

A spatial, simultaneous model of social capital and poverty

This study explores the interrelationship between social capital and poverty, a negative indicator of well-being, in the Western United States. Econometric models that account for the endogeneity of poverty and social capital, spatial dependence, and cross-equation error correlation were used to explore two questions: is the presence of social capital associated with reduced poverty levels and does the presence of poverty impact social capital stocks? We found evidence that communities with higher social capital levels tend to have lower poverty rates and that poverty may pose barriers to social capital formation. This suggests that policies to reduce poverty will be more effective if coupled with policies to support social capital formation. The study's findings are particularly salient for communities in persistent poverty. These results emerged only after accounting for endogeneity and spatial relationships. Because many factors contributing to well-being are jointly determined with well-being and indicators of well-being are frequently spatially clustered, this situation is likely to be more common than has been typically recognized in the literature

Analysis of the dynamic co-expression network of heart regeneration in the zebrafish.

The zebrafish has the capacity to regenerate its heart after severe injury. While the function of a few genes during this process has been studied, we are far from fully understanding how genes interact to coordinate heart regeneration. To enable systematic insights into this phenomenon, we generated and integrated a dynamic co-expression network of heart regeneration in the zebrafish and linked systems-level properties to the underlying molecular events. Across multiple post-injury time points, the network displays topological attributes of biological relevance. We show that regeneration steps are mediated by modules of transcriptionally coordinated genes, and by genes acting as network hubs. We also established direct associations between hubs and validated drivers of heart regeneration with murine and human orthologs. The resulting models and interactive analysis tools are available at http://infused.vital-it.ch. Using a worked example, we demonstrate the usefulness of this unique open resource for hypothesis generation and in silico screening for genes involved in heart regeneration